한국산 무계목 강관 반덤핑 제소

Seamless Carbon and Alloy Steel Standard, Line, and Pressure Pipe from the Czech Republic (AD), the Republic of Korea (AD/CVD), Russia (AD/CVD), and Ukraine (AD)

Vallourec (“Petitioner”) has filed antidumping (AD) and countervailing duty (CVD) petitions on imports of Seamless Carbon and Alloy Steel Standard, Line, and Pressure Pipe from the Czech Republic (AD), the Republic of Korea (AD/CVD), Russia (AD/CVD), and Ukraine (AD). The scope of the petitions is provided below. 

Petitioners have requested AD duties as described below, as well as CVD duties to offset alleged Korean and Russian subsidies.

Country                                           AD Duties Requested

  • Czech Republic                             ~48.5 percent
  • Korea                                                ~124 percent
  • Russia                                              ~138 percent
  • Ukraine                                            ~40 percent

Korean Producers Identified in the Petition:

  • Iljin Steel Corp.
  • Husteel Co., Ltd.
  • Hansae Co. Ltd.

Expected Timeline

EventCurrent Deadline (could be extended)Extended Deadline
Petition7/8/20207/8/2020
DOC Initiation7/28/20207/28/2020
ITC Preliminary Conference7/29/20207/29/2020
ITC Prelim Determination8/24/20208/24/2020
DOC Preliminary CVD Determination (*cash deposits required for imports*)10/1/202011/20/2020
DOC Preliminary AD Determination12/15/20202/3/2021
DOC Final CVD Determination12/15/20202/10/2020
DOC Final AD Determination3/1/20216/18/2021
ITC Final Injury Determination for CVD1/29/20214/5/2021
ITC Final Injury Determination for AD4/14/20218/2/2021
CVD Order2/5/20214/12/2021
AD Order4/21/20218/9/2021

Scope of the Petitions:

The merchandise covered by the scope of these investigations is seamless carbon and alloy steel (other than stainless steel) pipes and redraw hollows, less than or equal to 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process (e.g., hot-finished or cold-drawn), end finish (e.g., plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish (e.g., bare, lacquered or coated). Redraw hollows are any unfinished carbon or alloy steel (other than stainless steel) pipe or “hollow profiles” suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials (“ASTM”) or American Petroleum Institute (“API”) specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel (other than stainless steel) standard, line, and pressure pipes produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, ASTM A-1024, and the API 5L specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusions discussed below.

Specifically excluded from the scope of the investigations are: (1) all pipes meeting aerospace, hydraulic, and bearing tubing specifications; (2) all pipes meeting the chemical requirements of ASTM A-335, whether finished or unfinished; and (3) unattached couplings. Also excluded from the scope of the investigation are all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness, of ASTM A-53, ASTM A-106 or API 5L specifications.

Subject seamless standard, line, and pressure pipe are normally entered under HTSUS 7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055, 7304.59.8060, 7304.59.8065, 7304.59.8070. The HTSUS subheadings and specifications are provided for convenience and customs purposes; the written description of the scope is dispositive.


저작권 2016. www.USKoreaTrade.com. 판권 소유. 이 웹 사이트에 게제된 자료을 읽기 위한 목적의 다운로드 및 인쇄 권한은 부여됩니다. 그 이외의 목적으로 이 웹사이트의 자료를 복사, 배포, 재전송, 또는 수정 하는 행위는, 이 웹 사이트 관리자의 명시적인 사전 서면 허가가 없이는, 전자 또는 출력된 형태이든 엄격히 금지됩니다. Copyright 2016. www.USKoreaTrade.com. All rights reserved. Permission is granted to download and print materials from this website for the purpose of viewing and reading. Any other copying, distribution, retransmission, or modification of information or materials on this website, whether in electronic or hard copy form, without the express prior written permission of the website manager, is strictly prohibited. 면책 조항: www.USKoreaTrade.com 에 게제된 자료는 정보를 제공 할 목적일 뿐, 법률 자문을 제공 할 목적이 아닙니다. 특정 문제에 대한 조언을 얻으려면 변호사에게 문의하십시오. 이 웹사이트를 사용하는 행위는 웹사이트 관리자와 사용자 사이의 변호사-고객 관계를 만들지 않습니다. Disclaimer: The materials available at www.USKoreaTrade.com are for informational purposes only and not for the purpose of providing legal advice. You should contact your attorney to obtain advice with respect to any particular problem. Use of this website does not create an attorney-client relationship between the website manager and the user.